Maint and Constr Vehicle OBE --> Vehicle:
vehicle signage data

Definitions

vehicle signage data (Information Flow): In-vehicle signing data that augments regulatory, warning, and informational road signs and signals. The information provided would include static sign information (e.g., stop, curve warning, guide signs, service signs, and directional signs) and dynamic information (e.g., local traffic and road conditions, restrictions, vehicle requirements, work zones, detours, closures, advisories, and warnings).

Maint and Constr Vehicle OBE (Source Physical Object): The 'Maint and Constr Vehicle OBE' resides in a maintenance, construction, or other specialized service vehicle or equipment and provides the processing, storage, and communications functions necessary to support highway maintenance and construction. All types of maintenance and construction vehicles are covered, including heavy equipment, supervisory vehicles, unmanned remote controlled field maintenance robots, and sensory platforms that may be wheeled or low altitude aerial vehicles (e.g. drones, balloons). The MCV OBE provides two-way communications between drivers/operators and dispatchers and maintains and communicates current location and status information. A wide range of operational status is monitored, measured, and made available, depending on the specific type of vehicle or equipment. A snow plow for example, would monitor whether the plow is up or down and material usage information. The Maint and Constr Vehicle OBE may also contain capabilities to monitor vehicle systems to support maintenance of the vehicle itself. A separate 'Vehicle OBE' physical object supports the general vehicle safety and driver information capabilities that apply to all vehicles, including maintenance and construction vehicles. The Maint and Constr Vehicle OBE supplements these general capabilities with capabilities that are specific to maintenance and construction vehicles.

Vehicle (Destination Physical Object): This 'Vehicle' physical object is used to model core capabilities that are common to more than one type of Vehicle. It provides the vehicle-based general sensory, processing, storage, and communications functions that support efficient, safe, and convenient travel. Many of these capabilities (e.g., see the Vehicle Safety service packages) apply to all vehicle types including personal vehicles, commercial vehicles, emergency vehicles, transit vehicles, and maintenance vehicles. From this perspective, the Vehicle includes the common interfaces and functions that apply to all motorized vehicles. The radio(s) supporting V2V and V2I communications are a key component of the Vehicle. Both one-way and two-way communications options support a spectrum of information services from basic broadcast to advanced personalized information services. Advanced sensors, processors, enhanced driver interfaces, and actuators complement the driver information services so that, in addition to making informed mode and route selections, the driver travels these routes in a safer and more consistent manner. This physical object supports all six levels of driving automation as defined in SAE J3016. Initial collision avoidance functions provide 'vigilant co-pilot' driver warning capabilities. More advanced functions assume limited control of the vehicle to maintain lane position and safe headways. In the most advanced implementations, this Physical Object supports full automation of all aspects of the driving task, aided by communications with other vehicles in the vicinity and in coordination with supporting infrastructure subsystems.

Included In

This Triple is in the following Service Packages:

• MC06: Work Zone Management
• MC07: Work Zone Safety Monitoring
• TI07: In-Vehicle Signage

This triple is associated with the following Functional Objects:

• MCV Vehicle Safety Monitoring
• MCV Work Zone Support
• Vehicle Gap Assist
• Vehicle Restricted Lanes Application
• Vehicle Traveler Information Reception

This Triple is described by the following Functional View Data Flows:

• work_zone_intrusion_alert_on_board_for_in_vehicle_signing

This Triple has the following triple relationships:

Communication Solutions

• EU: DEN Service - BTP/GeoNetworking/G5 (16)
• US: SAE Traveler Info - LTE-V2X WSMP (21)
• US: SAE Traveler Info - WAVE WSMP (23)
• EU: In-Vehicle Information - BTP/GeoNetworking/G5 (27)
• TPEG2 - BTP/GeoNetworking/G5 (27)

Selected Solution

US: SAE Traveler Info - WAVE WSMP

Solution Description

ITS Application Entity SAE J2735 SAE J2945/4			Click gap icons for more info.
Mgmt Addressed Elsewhere	Facilities SAE J2945	Security Bundle: IEEE 1609.2
	TransNet IEEE 1609.3
	Access Bundle: WAVE - Subnet

Note that some layers might have alternatives, in which case all of the gap icons associated with every alternative may be shown on the diagram, but the solution severity calculations (and resulting ordering of solutions) includes only the issues associated with the default (i.e., best, least severe) alternative.

Characteristics

Security